Fix metal doors

Do you need to Fix an apartment armored door with a guarantee for the services of a master?

Our company provides licensed services for the modernization, burglar resistance and Fix of doors. Call if you can't get home, lost your keys or the lock broke, your door was attacked by hooligans or the coating has lost its attractiveness. We are here to help and help you save money. Highly qualified employees Fix the door quickly, efficiently, inexpensively.

Improving the security of a metal door: Intrusion methods are constantly being improved. That is why the doors, which five to ten years ago could successfully protect the house from uninvited guests, today cannot offer serious resistance to intruders. Our company will help you to Fix an iron door, to make it truly reliable.

The company's specialists are ready to offer modern means of modernization:

  • Protecting the metal lock area. sheets or armor plates.

  • Mounting the pin protection from door removal.

  • Installing an additional sealer.

  • Installation welding or Fix steel hinges.

  • Installing decorative panels . We offer a wide range of the latest models of certified locking devices made in Italy, Germany, Austria, Israel, Turkey, Spain. The keys are sealed by the manufacturer - this is an additional guarantee of protection against intruders.

  • Straighten or flatten the canvas door frames

Fix and restore doors fixing of coatings: Fix metal, iron, steel door panels is our job. Contact us right now, we will restore or improve your door. Our experts can fix the problem with minimal time We will perform replacement of the door upholstery, we will insulate, glue the seal, strengthen, cut and install an additional locking device, replace a simple mechanism with a more modern, burglar-resistant. Do not put off Fixing doors - it's just dangerous!

Restoring doors after "uninvited guests"

Employees of rescue services, housing and communal services do not know how to correctly open doors. Often, after completion of work in an emergency, holes, dents, traces of fire, scratches remain on the door covering. Even worse with doors opened by intruders. When breaking in, they tend to get into the room as soon as possible, while the safety of your door leaf does not bother them at all. Returning home, you can see cut hinges, a mutilated canvas, a lock uprooted. Don't waste your money on a new door. We'll fix everything. Fix the doors by calling our firm. Dispatchers will accept the call, immediately pass it on to the team of masters. You just have to wait for the experts. After the Fix, you will not recognize your door! The master will weld the cut loops, carefully apply patches, metal plates. And new modern reliable locks with an increased or maximum degree of secrecy will reliably protect the house from unauthorized entry. Departure in Massachusetts is available around the clock.

Fix a metal door after misuse: Steel doors are of high strength. They are durable, reliable, resistant to temperature extremes, precipitation. A high-quality metal door can last more than ten years. However, with improper care or careless attitude, door parts wear out prematurely, door Fix is required. Very often, a breakdown occurs completely unexpectedly, just when you are late for work or are going to visit.

The specialists of our company are ready to provide you with qualified assistance in restoring the door. We leave immediately after receiving a call, we carry out Fix work as quickly as possible.

We do welding work, including welding on loose hinges. This breakdown is most often found with increased use of public entrance doors in porches, shops, offices. In such conditions, it is the loops that suffer first, they fray, bend or simply fall off. Entrust the fixing and fixing of the door to specialists. Employees of the company are well aware that the entire production process of the enterprise depends on the efficiency of their actions. To save time, the masters immediately take with them all the necessary material, including the welding machine.

Contact us for help, we urgently and efficiently Fix iron entrance doors.

Fixing doors after incorrect installation: Modern doors require a professional approach. A specialist installer must know the basics of mechanics, own special tools, and have work experience. That is why you should not trust Fix of a metal door to friends, or do this work yourself. Violation of technology can lead to unpleasant consequences: involuntary slamming of the door, failure of locks, deformation of the door leaf, distortion of the entire door structure.

The craftsmen of our firm are well aware of such problems and how to solve them. We also eliminate the effects of shrinkage and any external damage.

At the request of the customer, the master will immediately install door handles, closers, eyes, change the valve.

Get in touch. Call now!

Quality metal door Fixs in Massachusetts.

Do you need Fix services, fixing of metal entrance doors, perhaps you want to replace locks or door trim? Contact us! Our specialists have many years of experience in carrying out all Fixs related to the entrance doors. We will professionally Fix doors, replace locks, finishes, we will make your door reliable, beautiful, impregnable! Updated doors will serve you for many years, because for us, quality service to our customers is our No. 1 priority! Our experts will provide you with samples of finishes, catalogs of locks and door fittings in the widest range. Recently, the relevance and number of requests related to the modernization, Fix, and fixing of entrance metal doors has increased. There can be many reasons for Fixing doors, below we will look at some of them.

BEFORE: installing the MDF panel on the front metal door from the inside AFTER: installing the MDF panel on the front metal door from the inside BEFORE: installing the MDF panel on the metal door AFTER: installing the MDF panel on a metal door BEFORE: installing an MDF panel on a double-winged metal door, replacing locks and fittings AFTER: installing an MDF panel on a double-winged metal door, replacing locks and fittings

Metal doors installed 10-15 years ago inevitably become obsolete, both technically and morally. The attractive appearance of the door is lost, the finish fades over the decade, fades, the upholstery peels off. Often pets spoil the door trim. Locks of the old design fail, and if they work, they are already completely unreliable, because intruders can open such a lock in a few minutes. And do not convince yourself that “there is nothing to steal from your house”, that “it will bypass”, because burglars will always find something to steal, but what about your nerves and spoiled mood? When you come to the decision that you need to do "something" with the old doors, the dilemma arises: install new doors or improve the existing one. The first option - installing a new front door, requires additional costs and in many cases is not economically justified. The solution may be to Fix the current door. Invite our specialist to your home! He will orient on the spot about the possibility and expediency of Fixing the door. Indeed, in some severe cases, it is indeed more profitable to purchase a new door than to start Fixing an old one. If it is more expedient to carry out Fixs, then our specialists are professionals in their field, they will carry out all possible work to Fix doors!

BEFORE: setting thermal film to wsecond front door AFTER: installation of thermal film on the second entrance door BEFORE: installation of thermal film on the front door with replacement of locks and fittings AFTER: installation of thermal film on the front door with replacement of locks and fittings

 

It is not uncommon for customers to come to us with their doors damaged as a result of intruders. The nature of such damage and the scale are different - damaged or broken locks, traces of a grinder on the door leaf, cut hinges, and other serious damage. If the door leaf is made of thin metal sheets, the attackers simply cut out the lock, along with the metal sheet where this lock is fixed. That is why, to prevent this, and also in case your door is broken in this way, our craftsmen can weld thicker sheets of metal around the locks, which prevent this type of breaking. Fix and welding works are also used if door hinges are cut off and in other cases of door Fix, when there is such a need.

BEFORE: upholstery of a metal door with replacement of locks and handles.AFTER: upholstery of a metal door with replacement of locks and handles.BEFORE: upholstery of an entrance door on both sides, replacement of locks and handles.AFTER: upholstery of the front door on both sides, replacement of locks and handles.BEFORE: upholstery of the front door on both sides, replacement of locks and handles.AFTER: upholstery of the front door on both sides, replacement of locks and handles.

After an emergency opening of doors, it is not uncommon for doors to need to be Fixed. As a rule, in such cases, minimal Fix of doors is needed. Call us, our experts will come to your home, provide advice based on your specific situation and find the best solution to any problem! Entrust door Fix to us and your updated door will delight your eyes for many years, it will become an impregnable barrier for any intruder!

 

Basic Fix of metal doors

Welding work - replacing door hinges, installing anti-cuts, adding metal around locks and much more

Replacing the door covering - leatherette, MDF lining, pvc film

Improve opening and closing doors

Insulation and soundproofing of doors*

Production of false panels

Installing additional anchors in the frame, etc.

All of the above works are performed by our craftsmen, depending on the specific design of the door. If your doors were originally made of poor quality or made in China, then Fixs are possible, but in very limited places. The wizard will always offer you an alternative solution to the problem.

Today, a large number of produced doors initially have many shortcomings, some of which can be eliminated. Many doors, according to their age, do not meet any sound and heat insulation standards. If you need door Fix, invite our master or call for a consultation.

Fix interior doors: interesting ideas for the fixing of canvases

When doing Fixs in an apartment, the question often arises of the need to replace old interior doors, the appearance of which does not fit into the overall updated interior. However, the purchase of new products is a very costly undertaking. The best way out of the situation will be the Fix of interior doors. This article presents a selection of interesting ideas, the implementation of which will allow you to update an old product at minimal cost.

Fixing door panels is cheaper than buying new ones

Contents [hide]

  • 1 Fix interior doors: the benefits of fixing

  • 2 fixing of interior doors depending on the material of manufacture

  • 3 Preparing to Fix wooden doors

  • 4 fixing options for interior wooden doors

    • 4.1 How to paint an old door: popular techniques

    • 4.2 Pasting the surface with various materials

    • 4.3 How to restore a door using wallpaper, vinyl and fabric

    • 4.4 How to restore old doors using decoupage and patchwork technique

    • 4.5 Do-it-yourself fixing of interior doors using decorative inserts

  • 5 How to update veneer doors and extend the life of the coating

  • 6 Do-it-yourself interior door fixing: video

Fix interior doors: the benefits of fixing

When carrying out renovation work, many are faced with the need to replace interior doors that have lost their aesthetic appearance over time. There are scratches, abrasions and other minor defects on their surface. However, if the products have retained their functionality, they can be restored.

New interior doors made of wood, veneer, and especially glass, are very expensive. Inexpensive you can buy only products made of MDF, which do not differ in durability and special attractiveness. Do-it-yourself door fixing will allow you to save a lot, while getting exclusive canvases that will attract attention, becoming the central element of the room.

Updating interior doors is especially desirable when it comes to vintage pieces with unique patterns and textures that have artistic or historical value that are true antiques.

It is also better to opt for the Fix of old doors, when their replacement can lead to a violation of the integrity of the opening or cladding of wall structures. There will be a need to close up the gaps formed, plastering, restoring the finish around the door frame. fixing is also justified when the canvas has a non-standard size and execution. Its replacement will become not only costly, but also time-consuming process.

fixing of interior doors depending on the material of manufacture

fixing of old interior doors can be carried out in various ways, which are selected based on the material of the door leaf.

Interior doors of the last century were made mainly from natural solid wood. Products could be supplemented with glass or mirror inserts. Later they began to use polymer decor. fixing of wooden canvases begins with the removal of old paint or varnish with further painting or laminating the surface.

Products made of beech or oak have an elegant natural texture with expressive patterns, so it is enough to clean and varnish them.

Most modern doors are made from fiberboard. Old paint is removed from them with a building hair dryer, and grinding is carried out using a fine sandpaper so as not to disturb the fine structure of the surface. Such doors can be finished with decorative elements or tiles by changing the surface relief.

If the door is pasted over with an innovative veneer that peels off over time, giving an untidy appearance to the surface, you should use wood glue to restore it.

Important!<spanstyle="font-weight: 400;"> When using wood glue, you must follow the temperature and humidity levels indicated in the instructions. Violation of operating conditions can lead to swelling or peeling of the veneer.

Do-it-yourself fixing of old interior doors made of metal is carried out by replacing fittings, locks, handles, painting the surface with paint and decorating the canvas with elements from various materials.

Helpful advice! The correct completion of the fixing of an interior door, regardless of the material of manufacture, should be accompanied by the installation of high-quality handles , locks and components, on which the further period of operation of the product depends.

Preparing for the Fix of wooden doors

At the initial stage of Fix and fixing of wooden doors, the old finish (paint, varnish, film or veneer) is removed, the bare natural or artificial surface is prepared with the elimination of flaws, leveling and cloth grinding. You can do the work yourself or use the services of specialists at affordable prices. fixing of doors can cost from 200 to 3 thousand dollars. depending on the complexity of the work.

Old paintwork can be removed with a blow dryer or special chemical paint removers. In the first case, the tool heats up the hard finish to a temperature of 600°C, after which it is easily cleaned with a spatula.

The chemical composition softens the paint, which is removed with a rag. The cleaned surface is polished with a grinder or sandpaper by hand.

If there are visible damages on the surface, they should be Fixed with a special wood filler of the appropriate shade or hot furniture wax. Small scratches are masked with a wax pencil.

Helpful advice! You can seal a hole in a wooden door with wood dust putty or varnish, which will merge with the general surface without standing out against its background.

After all Fixs are completed, the final grinding of the surface is carried out, which is thoroughly cleaned of dust with wet rag. After complete drying, the canvas is completely ready for decorative finishing.

Options for the fixing of interior wooden doors

There are many ideas for restoring wooden doors. The price for services is determined by the condition of the canvas and the complexity of the decoration process. Methods can be grouped into three categories:

  1. Staining with modern liquid coating techniques.

  2. Pasting with textured materials in the form of veneer, film, wallpaper, fabric.

  3. Using decorative elements from various materials.

Helpful advice! When restoring a door leaf, several methods can be used simultaneously, harmoniously combining them between yourself. The main thing is that the chosen option fits into the interior design concept of the room.

The easiest and least expensive way to restore a wooden door is to paint the surface. If you want to preserve the natural structure and pattern of a canvas made from natural solid wood, you can use a stain of the desired shade, which has antiseptic and water-repellent properties. After it, the canvas is covered with a colorless varnish. The stain may not be used at all. To do this, it is enough to cover the door with tinted varnish.

If the canvases have puttied defects or are lined with hardboard or MDF, in this case old doors are painted. The surface should be pre-treated with a special primer.

Polyurethane, alkyd and acrylic paints are suitable for painting doors. The first two options have a strong smell, but they dry fairly quickly. Acrylic enamels are produced almost odorless. Such paints are distinguished by a rich palette of shades. After the acrylic agent dries, the canvas is opened with a special furniture varnish in 2-3 layers.

How to paint an old door: popular techniques

Ya wooden surface can not just be painted in a single color. It will be possible to make it unique thanks to one of the modern techniques.

Artistic painting is very popular. A pattern is applied to a pre-painted surface using brushes, a sponge or a spray can. To do this, you must have artistic talent or resort to the help of a specialist. Surfaces painted with multi-layered strokes or glazing techniques look original. You can apply an interesting pattern using a stencil.

For a retro interior, the doors can be refurbished antique. To do this, artistic effects are created in the form of patina, craquelure, tears, scuffs or cracks, using special compositions for painting wooden doors. The price of work using this technology will cost from 1500 rubles.

To get the effect of artificial aging of the surface, you can use ordinary paint of a lighter shade than the base. It is applied to the surface, and then gently soaked with a soft sponge, which makes the base spotty. You can also achieve an unusual texture of the canvas with a hard brush, the edge of gauze, the rough side of the sponge and other elements.

Helpful tip! You can turn an ordinary door into a canvas, slate or create another for it unusual texture, using special paints and varnishes.

Pasting a surface with various materials

An old unpresentable door can be restored with natural veneer. For this, not only wooden products are suitable, but also cheaper canvases made from pressed sawdust. This technique will give the design an expensive prestigious look. This option is most suitable for blind canvases without decorative glass inserts and paneled elements.

Veneering the door with veneer is done in the following sequence:

  • The canvas is removed from the hinges and laid on a horizontal surface;

  • material is fixed from the center towards the edges of the product. Small areas are smeared with special glue, then to them

  • veneer pressed;

  • the pasted surface is rolled;

  • The fabric is heated with a heat gun and rolled again to ensure a secure bond between surface and finish.< /li>

Important! After complete drying, the veneered surface is covered with a layer of varnish or wax. Do-it-yourself fixing of a wooden interior door can be done using a self-adhesive film. Today in specialized stores a wide range of material of different shades and textures is presented. A special place is occupied by films with imitation of various types of natural wood. The main advantage of the material is its low cost in comparison with veneer. The process of pasting the surface with a film is simple, and as a result, the canvas acquires a presentable appearance.

 

The main characteristics of the material. Technology features. The use of heaters. Ready-made upholstery kits. Photo and video materials.

Surface lamination is done as follows:

  • using a sharp construction knife, a sheet of film is cut to the required size;

  • the protective layer is removed from the wrong side by 2-3 cm, exposing the adhesive surface, which is carefully applied to the canvas and smoothed when using a rubber spatula or cloth;

  • sequential removal of small protective strips on the wrong side is performed, while applying the film to the surface and smoothing it without tension;< /span>

  • The material is trimmed at the corners and the edges are folded over. If several parts of the film are used, they are overlapped.

How to restore a door using wallpaper, vinyland fabric

A common and easy way to restore old doors is to wallpaper the surface. To do this, you can use the same option that was used for wall decoration. In this case, it will be possible to disguise the door, "dissolving" it in space. Using wallpaper of a different color palette and pattern will highlight interior doors against the general background.

Photo wallpaper or a piece of vinyl with photo printing looks original and unusual. The material is glued to a dry, clean surface using high-quality PVA glue.

Interior doors decorated with wallpaper and moldings look noble and presentable. For this, vinyl or non-woven products are selected, which can have a plain surface in a pastel or saturated color, or contain a discreet pattern.

A fragment of the required size is glued to the surface of the door using PVA wood glue, which is applied directly to the door leaf. The wallpaper is pressed against the product and leveled with a roller or rag, expelling air bubbles.Important! If it is necessary to join elements, they are glued close to each other without overlap.

After the surface is completely dry, polyurethane moldings are glued according to the chosen scheme. They are fixed with liquid nails or PVA glue.

The doors can be restored using textile material, thanks to which the design will become a real exclusive interior. The fabric can match the furniture upholstery, or have a beautiful pattern and color that will harmoniously fit into the design of the room.

Textile material can be fixed to the surface in different ways. It is convenient to glue thin fabric with double-sided adhesive tape. Thicker material is fixed by using PVA glue. Heavy canvases are fastened with staples or furniture nails.

Helpful advice! To finish the door, it is better to choose dark-colored fabrics or canvases with a large expressive pattern , on which pollution will not be too noticeable.Different finishes can be seen in the photo of the fixing of interior doors with your own hands.

How to restore old doors using decoupage and patchwork technique

You can update an old interior door with modern techniques. Decoupage is very popular for decorating various surfaces.

The doors do not need to be removed from their hinges to implement this technique. It is recommended to pre-prime the surface in 2 layers. The selected decoupage card is soaked in water for 10-12 minutes. At this time, a layer of PVA glue is applied to the canvas. The fragment is taken out of the water. With the help of a cloth, excess moisture is removed from it and protective stripes are removed.

The card is applied to the surface and carefully smoothed with a rubber spatula to remove air bubbles. After the surface is completely dry, it should be opened with acrylic varnish in several layers.

To decorate the surface using the patchwork technique, you will need scraps of thick fabric with processed or non-shrinking edges, leather fragments, lace, ribbons, clippings from magazines, newspapers, photographs that can be combine with each other, creating interesting collages.

Helpful tip! The patchwork technique is not suitable for decorating bathroom doors or other wet areas, because the finish will quickly begin to turn yellow and become moldy.

The surface is pre-primed. Next, a layer of PVA glue is applied to it. In an arbitrary or special order, do-it-yourself fragments of the pattern are laid out on the door, which are pressed tightly against the surface and rolled with a roller. Heavy items can be fixed with a stapler. A completely dried collage is covered with a layer of furniture varnish.

Do-it-yourself fixing of interior doors using decorative inserts

To decorate an old door, you can use glass inserts or change the state of existing elements. The easiest way is to stick a colored film on the glass surface.

Stained glass technique looks especially impressive when restoring old wooden interior doors. For her incarnationyou will need special stained glass paints, brushes, a marker and a finished sketch. The process is carried out in the following sequence:

  • The glass stake is removed from the door and placed on a horizontal surface. You can remove the entire door;

  • on the back side of the element, the outline of the future drawing is drawn using a marker according to the sketch;

  • on the front side, a contour is drawn with brushes and paints, which must dry completely before the next process;

  • white spaces are filled with the desired shades of paint;

  • the picture can be supplemented with decorative elements in the form of pebbles, rhinestones, pieces of glass that are glued to a surface that has not yet frozen. span>

Idea! Stained glass technique can be used not only for glass inserts, but also for the door itself canvases.

Glass inserts can be transformed by sandblasting the elements by contacting a specialized workshop.

In a blank product, you can cut holes of any size and shape yourself, into which glass, mirror or ceramic elements are inserted. They can also be glued onto the canvas in a chaotic manner, or create a specific ornament.

Doors decorated with various bulk materials, the grains of which are fixed with glue, will look original and exclusive. The dried surface must be opened with varnish for the durability of the design.

How to renew veneer doors and extend the life of the coating

The method of restoring veneer interior doors depends on the nature of the damage. Often, swollen areas can be seen on the surface, which are the result of improper gluing of the veneer, or resulting from high ambient humidity.

Such imperfections can be dealt with by using a hot iron to iron the swollen surface. You must first put a wet cloth on it for 10-15 minutes to soften the veneer.

You can remove swollen areas by gluing loose veneer fragments. To do this, PVA glue is drawn into the medical syringe, which is injected under the coating. The veneer is tightly pressed against the canvas, the glue is evenly distributed. It is recommended to press down the glued place with a load for several hours. Visible scratches and other minor damages may form on the surface of the veneer doors. You can mask defects with melted wax, the color of which should match the shade of the finish. Surfaces should be slightly roughened, then degreased and voids filled.

If the canvas is deeply damaged, then it is Fixed with veneer patches. To do this, damaged areas are cut out on the surface. If deep damage has formed under them, they are Fixed with putty.

Fragments of the desired size and shape are cut from the new veneer, which must also match in type and direction of the pattern. The patch should not stand out against the general background. It is glued to the surface with PVA glue.

If you want to completely update the coating, the question arises how to paint veneer doors. The surface is pre-cleaned, puttied if necessary and then primed. The canvas can be painted using hypral, polyurethane or water-dispersed paints.Important! Surface coloring it is applied in two layers with each completely dry, while one is applied in a horizontal direction, and the second in a vertical direction, which will create an even coating without gaps.

Veneered doors can be primed with shellac varnish or cellulose polish for a glossy finish.

Fixing old doors is a simple and interesting undertaking that you can do yourself using one of the suggested methods. In the absence of the necessary skills, you can resort to the help of specialists who will prepare the surface and decorate it in one of the chosen ways. In this case, the price of fixing of interior doors will depend on the condition of the canvas and the Fix costs.

 

When doing Fixs in an apartment, the question often arises of the need to replace old interior doors, the appearance of which does not fit into the overall updated interior. However, the purchase of new products is a very costly undertaking. The best way out of the situation will be the Fix of interior doors. This article presents a selection of interesting ideas, the implementation of which will allow you to update an old product at minimal cost.

Fix interior doors: interesting ideas for restoring canvases

Fixing door panels is cheaper than buying new ones


1 Fix interior doors: the benefits of fixing

2 fixing of interior doors depending on the material of manufacture

3 Preparing to Fix wooden doors

4 fixing options for interior wooden doors

4.1 How to paint an old door: popular techniques

4.2 Pasting the surface with various materials

4.3 How to restore a door using wallpaper, vinyl and fabric

4.4 How to restore old doors using decoupage and patchwork technique

4.5 Do-it-yourself interior door fixing using decorative inserts

5 How to update veneer doors and extend the life of the coating

6 Do-it-yourself interior door fixing: video

Fix interior doors: the benefits of fixing

When carrying out renovation work, many are faced with the need to replace interior doors that have lost their aesthetic appearance over time. There are scratches, abrasions and other minor defects on their surface. However, if the products have retained their functionality, they can be restored.

For more convenience during the fixing process, it is recommended to remove the doors from the hinges

For more convenience during the fixing process, it is recommended to remove the doors from the hinges

New interior doors made of wood, veneer, and especially glass, are very expensive. Inexpensive you can buy only products made of MDF, which do not differ in durability and special attractiveness. Do-it-yourself door fixing will allow you to save a lot, while getting exclusive canvases that will attract attention, becoming the central element of the room.

Updating interior doors is especially desirable when it comes to vintage pieces with unique patterns and textures that have artistic or historical value that are truly antiques.

It is also better to opt for the Fix of old doors, when their replacement can lead to a violation of the integrity of the opening or cladding of wall structures. There will be a need to close up the gaps formed, plastering, restoring the finish around the door frame. fixing is also justified when the canvas has a non-standard size and execution. Its replacement will become not only costly, but also time-consuming process.

fixing of interior doors depending on the material of manufacture

fixing of old interior doors can be carried out in various ways, which are selected based on the material of the door leaf.

Sometimes sanding and applying a coat of varnish is enough to update an old door

Sometimes sanding and applying a coat of varnish is enough to update an old door

Interior doors of the last century were made mainly from natural solid wood. Products could be supplemented with glass or mirror inserts. Later they began to use polymer decor. fixing of wooden canvases begins with the removal of old paint or varnish with further painting or laminating the surface.

Products made of beech or oak have an elegant natural texture with expressive patterns, so it is enough to clean and varnish them.

<spanstyle="font-weight: 400;">Most modern doors are made from fiberboard. Old paint is removed from them with a building hair dryer, and grinding is carried out using a fine sandpaper so as not to disturb the fine structure of the surface. Such doors can be finished with decorative elements or tiles by changing the surface relief.

If the door is pasted over with an innovative veneer that peels off over time, giving an untidy appearance to the surface, you should use wood glue to restore it.


After fixing of the door, new locks and handles are selected

After the fixing of the door, new locks and handles are selected

Important! When using wood glue, the temperature and humidity levels indicated in the instructions should be observed. Violation of operating conditions can lead to swelling or peeling of the veneer.

Do-it-yourself fixing of old interior doors made of metal is carried out by replacing fittings, locks, handles, painting the surface with paint and decorating the canvas with elements from various materials.

Helpful tip! The correct completion of the fixing of an interior door, regardless of the material of manufacture, should be accompanied by the installation of high-quality handles, locks and components, on which the further period of operation of the product depends.

Preparing to Fix wooden doors

At the initial stage of Fix and fixing of wooden doors, the old finish (paint, varnish, film or veneer) is removed, the bare natural or artificial surface is prepared with the elimination of flaws, leveling and cloth grinding. You can do the work yourself or use the services of specialists at affordable prices. fixing of doors can cost from 800 to 3 thousand rubles. depending on the complexity of the work.

The process of removing old paint from a door using a blow dryer

The process of removing old paint from a door using a blow dryer

Old paintwork can be removed with a blow dryer or special chemical paint removers. In the first case, the tool warms up the hard finish to a temperature of 600°C, after which it is easily cleaned with a spatula.

The chemical composition softens the paint, which is removed with a rag. The cleaned surface is polished with a grinder or sandpaper by hand.

If there are visible damages on the surface, they should be Fixed with a special wood filler of the appropriate shade or hot furniture wax. Small scratches are masked with a wax pencil.

Helpful tip! You can close a hole in a wooden door with a putty consisting of wood dust or varnish, which will merge with the general surface without standing out against its background.

Cracks and scratches on the surface of the door leaf are sealed with a special putty of a suitable shade

Cracks and scratches on the surface of the door leaf are sealed with a special putty of a suitable shade

After all Fix work is done, the final polishing of the surface is carried out, which is thoroughly cleaned of dust with a damp rag. After complete drying, the canvas is completely ready for decorative finishing.

Options for restoring interior wooden doors

There are many ideas for restoring wooden doors. The price for services is determined by the condition of the canvas and the complexity of the decoration process. Methods can be grouped into three categories:

Staining with modern liquid coating techniques.

Pasting with textured materials in the form of veneer, film, wallpaper, fabric.

The use of decorative elements from various materials.

Helpful tip! When restoring the door leaf, several methods can be used simultaneously, harmoniously combining them with each other. The main thing is that the chosen option fits into the interior design concept of the room.

Overhaulold wooden door

Overhaul of an old wooden door

The easiest and least expensive way to restore a wooden door is to paint the surface. If you want to preserve the natural structure and pattern of a canvas made from natural solid wood, you can use a stain of the desired shade, which has antiseptic and water-repellent properties. After it, the canvas is covered with a colorless varnish. The stain may not be used at all. To do this, it is enough to cover the door with tinted varnish.

If the canvases have puttied defects or are lined with hardboard or MDF, in this case old doors are painted. The surface should be pre-treated with a special primer.

Polyurethane, alkyd and acrylic paints are suitable for painting doors. The first two options have a strong smell, but they dry fairly quickly. Acrylic enamels are produced almost odorless. Such paints are distinguished by a rich palette of shades. After the acrylic agent dries, the canvas is opened with a special furniture varnish in 2-3 layers.

How to paint an old door: popular techniques

Wooden surfaces can be more than just painted a solid color. It will be possible to make it unique thanks to one of the modern techniques.

The fastest and cheapest way to update an old door is to paint

The fastest and cheapest way to update an old door is to paint

Artistic painting is very popular. A pattern is applied to a pre-painted surface using brushes, a sponge or a spray can. To do this, you must have artistic talent or resort to the help of a specialist. Surfaces painted with multi-layered strokes or glazing techniques look original. You can apply an interesting drawing using a stencil.

For a retro interior, the doors can be refurbished antique. To do this, artistic effects are created in the form of patina, craquelure, tears, scuffs or cracks, using special compositions for painting wooden doors. The price of work using this technology will cost from $150.

To get the effect of artificial aging of the surface, you can use ordinary paint of a lighter shade than the base. It is applied to the surface, and then gently soaked with a soft sponge, which makes the base spotty. You can also achieve an unusual texture of the canvas with a hard brush, the edge of gauze, the rough side of the sponge and other elements.

Helpful tip! An ordinary door can be turned into a canvas, a slate board or another unusual texture can be created for it using special paints and varnishes.

Examples of updating doors with paint

Examples of updating doors with paint

Pasting the surface with various materials

An old unpresentable door can be restored with natural veneer. For this, not only wooden products are suitable, but also cheaper canvases made from pressed sawdust. This technique will give the design an expensive prestigious look. This option is most suitable for blind canvases without decorative glass inserts and paneled elements.

Veneering a door is done in the following sequence:

The canvas is removed from the hinges and laid on a horizontal surface;

Fixation of the material is carried out from the center towards the edges of the product. Small areas are smeared with special glue, then to them

veneer pressed;

the glued surface is rolled;

Using a building dryer, the fabric is heated and rolled again with a roller, which will ensure a reliable connection of the surface and finish.

Important! The veneered surface, after complete drying, is covered with a layer of varnish or wax.

Veneer sheets are a quick and inexpensive way to update old doors and furniture

With the help of veneer sheets you can quickly and inexpensively renovate old doors and furniture

Do-it-yourself fixing of a wooden interior door can be done using a self-adhesive film. Today in specialized stores a wide range of material of different shades and textures is presented. A special place is occupied by films with imitation of various types of natural wood. The main advantage of the material is its low cost in comparison with veneer. The process of pasting the surface with a film is simple, and as a result, the canvas acquires a presentable appearance.

 

The main characteristics of the material. Technology features. The use of heaters. Ready-made upholstery kits. Photo and video materials.

Surface lamination is done as follows:

using a sharp construction knife, a sheet of film is cut to the required size;

the protective layer is removed from the wrong side by 2-3 cm, exposing the adhesive surface, which is carefully applied to the canvas and smoothed with a rubber spatula or cloth;

next, the small protective strips on the wrong side are sequentially removed, while applying the film to the surface and smoothing it without tension;

The material is trimmed at the corners and the edges are folded over. If several parts of the film are used, they are overlapped.

Pasting an old canvas with adhesive film

Pasting an old canvas with adhesive film

How to refurbish a door using wallpaper, vinyl and fabric

A common and easy way to restore old doors is to wallpaper the surface. To do this, you can use the same option that was used for wall decoration. In this case, it will be possible to disguise the door, "dissolving" it in space. Using wallpaper of a different color palette and pattern will highlight interior doors against the general background.

Photo wallpaper or a piece of vinyl with photo printing looks original and unusual. The material is glued to a dry, clean surface using high-quality PVA glue.

Interior doors decorated with wallpaper and moldings look noble and presentable. For this, vinyl or non-woven products are selected, which can have a plain surface in a pastel or saturated color, or contain a discreet pattern.

A fragment of the required size is glued to the surface of the door using PVA wood glue, which is applied directly to the door leaf. The wallpaper is pressed against the product and leveled with a roller or rag, expelling air bubbles.

fixing of an interior door using wallpaper and moldings

fixing of an interior door using wallpaper and moldings

Important! If it is necessary to join elements, they are glued close to each other without overlap.

After the surface is completely dry, polyurethane moldings are glued according to the chosen scheme. They are fixed with liquid nails or PVA glue.

You can restore the doors with the help of textile material, thanks to which the structure will become a real exclusive interior. The fabric can match the furniture upholstery, or have a beautiful pattern and color that will harmoniously fit into the design of the room.

Textile material can be fixed to the surface in different ways. It is convenient to glue thin fabric with double-sided adhesive tape. Thicker material is fixed by using PVA glue. Heavy canvases are fastened with staples or furniture nails.

Helpful tip! To finish the door, it is better to choose dark-colored fabrics or canvases with a large expressive pattern, on which dirt will not be too noticeable.

The walls and door of the room are covered with the same wallpaper

The walls and the door of the room are covered with the same wallpaper

Different finishes can be seen in the photo of the fixing of interior doors Больше информации об этом исходном текстеЧтобы получить дополнительную информацию, введите исходный текст Отправить отзыв Боковые панели История Сохраненные Предложить перевод Максимальное количество символов: 5 000. Чтобы переводить дальше, пользуйтесь стрелками.with your own hands.

How to restore old doors using decoupage and patchwork technique

You can update an old interior door with modern techniques. Decoupage is very popular for decorating various surfaces.

The doors do not need to be removed from their hinges to implement this technique. It is recommended to pre-prime the surface in 2 layers. The selected decoupage card is soaked in water for 10-12 minutes. At this time, a layer of PVA glue is applied to the canvas. The fragment is taken out of the water. With the help of a cloth, excess moisture is removed from it and protective stripes are removed.

The card is applied to the surface and carefully smoothed with a rubber spatula to remove air bubbles. After the surface is completely dry, it should be opened with acrylic varnish in several layers.

To decorate the surface using the patchwork technique, you will need scraps of thick fabric with processed or non-shrinking edges, leather fragments, lace, ribbons, clippings from magazines, newspapers, photographs that you can combine with each other, creating interesting collages.

Fix an old door using decoupage technique

Fix an old door using decoupage technique

Helpful tip! The patchwork technique is not suitable for decorating the doors of a bathroom or other damp room, as the finish will quickly begin to turn yellow and become moldy.

The surface is pre-primed. Next, a layer of PVA glue is applied to it. In an arbitrary or special order, do-it-yourself fragments of the pattern are laid out on the door, which are pressed tightly against the surface and rolled with a roller. Heavy items can be fixed with a stapler. A completely dried collage is covered with a layer of furniture varnish.

Do-it-yourself fixing of interior doors using decorative inserts

To decorate an old door, you can use glass inserts or change the state of existing elements. The easiest way is to stick a colored film on the glass surface.

Stained glass technique looks especially impressive when restoring old wooden interior doors. To implement it, you will need special stained glass paints, brushes, a marker and a finished sketch. The process is carried out in the following sequence:

The glass stake is removed from the door and placed on a horizontal surface. You can remove the entire door;

Glass inserts on the door can be decorated with stained glass and drawings

Glass inserts on the door can be decorated with stained glass and drawings

on the back side of the element, the outline of the future drawing is drawn using a marker according to the sketch;

on the front side, a contour is drawn with brushes and paints, which must dry completely before the next process;

necessary shades of paint fill empty spaces;

The picture can be supplemented with decorative elements in the form of pebbles, rhinestones, pieces of glass that are glued to a surface that has not yet hardened.

Great idea! Stained glass technique can be used not only for glass inserts, but also for the door leaf itself.

Glass inserts can be transformed by sandblasting elements by contacting a specialized workshop.

In a blind product, you can cut holes of any size and shape yourself, into which glass, mirror or ceramic elements are inserted. They can also be glued to the canvas in a chaotic manner, or create a specific ornament.

In old solid doors, you can cut out a place to insert stained glass

In old solid doors, you can cut out a place to insert stained glass

Doors decorated with various bulk materials, the grains of which are fixed with glue, will look original and exclusive. The dried surface must be opened with varnish for the durability of the design.

How to update dwonly in terms of design, but also in terms of structure, construction, and mechanism. First you need to study what models of such accessories exist and what distinguishing features they have.

Swivel. This category includes classic round handles, as well as special knobs with locks. To put these products into action, you just need to turn the handle clockwise or counterclockwise. Rotary knobs are very common and are considered one of the most convenient to use.

Press. The presence of a lever differs in push types of door handles. In order to hide the tongue in such models, you just need to lightly press on it and move it down. Such types of door fittings are recognized as one of the most common and in demand. They are found in many dwellings and are in great demand.

Stationary. These types of fittings are used today in rare cases. They have nothing to do with the lock system. They are special brackets or buttons attached to the base with screws. These pens cannot boast of great reliability and safety, but they are usually inexpensive. When buying stationary products, it is important to remember that they are less functional.

Before you start Fixing a door handle yourself, you need to familiarize yourself with the features of the mechanism that is present in it. Basic models usually have several basic components.

Castle. This is an internal mechanism that is responsible for blocking the canvas in the opening. The main detail in the lock is the crossbar (tongue, latch).

A pin with four faces. This element is brought out and moves the inner part, integrating with the handle itself.

Handle. This is the element of the handle, which is the primary impact when opening and closing the door.

Decorative overlay. This component is designed to hide fasteners underneath. In addition, the overlays give the handle and mechanism a more attractive appearance.

Answer. This part is directly on the box. It is a plate that closes the hole in the frame, where the fold tongue usually goes.

Types of damage

There are a number of common problems with modern doorknobs. It is with them that in most cases home craftsmen have to fight.

Handle stuck. This defect makes itself felt at the moment when, when opening the door leaf, additional efforts have to be applied to the lever. As a rule, this requires more force, and sometimes even oscillatory movements. Such an unusual impact as a result may be the reason for a serious Fix of the door handle.

Latch stuck. The lock makes systems more functional and practical, but at the same time makes them more complex. If the movement of parts such as crossbars becomes more difficult for one reason or another, then the handle will be a little more difficult to open.

Situations when gears get loose. If a gap appears at the contact area between the handle and the door leaf, it will begin to stagger and even sag. Because of this, the use of the door will be more difficult and less convenient.

Handle fell off or remained in hand. If such a disaster happened to the structure in your house, then its further use will simply be impossible. It will not be possible to do without a thorough Fix.

Multiple faceted pin damage. This element is responsible for the direct holding of the handle. The failure of this component of the part is usually due to the unnecessarily low cost of a product made from low-quality raw materials.

Mechanism jamming. With this common failure, when pressed, the handle does not return to its original place. If the design is working properly, then it takes very little time for the handle to return to its original position. In the case when the mechanism is jammed, the handle starts to move very slowly or it springs at all. In the last mentioned case, a person is forced to make certain efforts so that the fittings fall into their original place. In this situation, the problem concerns both the lever and the latch of the device.

Tongue wedge. If such a problem occurs, then when you press the handle, the tongue does not change its immediate location. It always remains in the inside of the door leaf or outside. In the first situation, it is rather difficult to close the door, and in the second, it is difficult to open it.

Shattered details. Many owners are faced with the problem of loose lock systems and door handles. These components can move away from the surface of the door, creak and even sag. Often there is a noticeable laxity of the entire locking mechanism as a whole. With such problems, a quick and competent Fix is necessary.

Reason for breakage

Before you start Fixing damaged and broken handles, you need to figure out what the causes of the breakdowns are.

If we are talking about the loss of the door handle, then this is most likely due to the fact that the lock in it was not operated very carefully or too actively. Under such conditions, the retaining ring is often displaced. Moreover, it can completely burst or deform.

A doorknob can get stuck due to accumulated debris, such as dust deposits. Significant accumulations of these inclusions sooner or later lead to improper operation of the handle - it starts to jam when opening and closing the door.

Four facet necks tend to get damaged because they were originally made from poor quality materials. Fragile elements are sooner or later seriously damaged, after which it is simply impossible to do without their replacement. That is why experts strongly do not recommend saving on the purchase of such accessories. Products that are too cheap will not last long, as they are usually made from second-rate raw materials.

As for another common problem, the failure of the tongue in the accessory, the reason here may be the presence of an overly short inner square. Gradually moving towards the latch, he begins to put pressure on it, preventing it from working normally.

Loose fasteners usually lead to loosening of an existing mechanism. In most cases, it is enough to tighten them in order to get rid of the problem.

Door handles are often broken due to improper use. This equipment must be used carefully and with care. Do not make jerks, sudden movements and turns the handle in the wrong direction. In addition, many problems can be avoided if you buy quality products from trusted manufacturers. Such models will not only last longer, but will also bring problems to a minimum. Do not skimp on buying a doorknob: a product that is too cheap may turn out to be of poor quality.

fix doorknob step by step

If the handle fell out

For such a problem, you need to:

 

remove the decorative rosette by unscrewing the bottom screw first;

remove the screws holding the mechanism;

Retrieve locking mechanism;

check lock ring condition;

replace the damaged part with a new one;

mechanism is lubricated;

the locking mechanism is put in place and screwed on;

return the decorative rosette.

 

Handle stuck

 

 

If the door handle sticks, then you need to:

 

disassemble its mechanism;

remove all impurities and inclusions;

apply some oil to the crossbar part;

Press the handle a couple of times to spread the oil over all the necessary components;

put the mechanism back.

 

Pin Damage

If the internal four-sided pin breaks, the mechanism will need to be replaced:

 

remove all fasteners holding the handle, then removet and herself;

unscrew the screw located at the base of the handle, and then remove the decorative bar;

Get the lock mechanism;

Unscrew the fasteners holding the lock bar, then remove it itself;

fix the handle, and then repeat the above steps in reverse order;

check that the assembled structure works correctly.

 

Tongue failure



T-shaped locks, keyboards.

If the door handle in an apartment or private house has been damaged by a tongue, then you will need:

 

pick up a square with a larger diameter;

if necessary, you will need to trim this part to the desired parameters;

then the handle is unscrewed and the mechanism is taken out;

change the square next;

after replacing the square, it is permissible to return the mechanism to its main place;

at the end of the work, the handle is fixed at its main location.

 

Helpful Tips

If you encounter small parts while Fixing a doorknob, then you should be doubly careful not to accidentally get injured during the work, and also not to lose tiny parts.

When choosing a suitable handle for an interior or front door, you need to consider its design. These details should fit into the environment and style of the interior. Otherwise, they will stand out from the general ensemble, making it disharmonious, despite its modest size.

Purchase only high quality doorknobs made from good materials. Do not take products from fragile and unreliable raw materials. So, cheap models made of silumin or options with plastic parts will not be the strongest.

When choosing a suitable door handle, keep in mind that such fittings are available in left-hand and right-hand versions. If it suddenly turns out that you bought a not very convenient option for yourself, then you won’t be able to correct your mistake - you will have to buy another handle.

Do not start Fixing a door handle yourself until you have a detailed understanding of its design and the existing mechanism. Otherwise, you risk damaging the product during Fix work.

Give proper care to the handle. The mechanisms present in such fittings should be lubricated (this procedure will have to be repeated periodically), as well as cleaned of various kinds of contaminants. If these simple processes are neglected, the product may malfunction and start to jam.

 

After Fixing a door handle, be sure to check that it works correctly. If necessary, adjust such an accessory.

 

Modern door handles are made from a variety of materials. If you are looking for a suitable model for your front door, then you should not stop at lightweight aluminum options. These products are recommended to be installed in interior door leafs.

 

If you notice that the door handle is noticeably loose, then the first thing you should look at its fasteners. Perhaps they have worn out over time, and they just need to be tightened up.


If we are talking about breakdowns of the handle of the entrance door leaf, then it is important to start Fixing it as soon as possible, because the safety of your home will depend on it. As long as the lock and the handle are out of order, the house or apartment will remain in danger.

If it is not possible to Fix the old front door handle (especially the iron one), then a new model should be installed as soon as possible. Please note that it must have exactly the same size as the previous pen. If, for example, it is smaller, then holes from the old fittings will remain noticeable.

It's not uncommon for pens to show noticeable scuffs. Such defects do not affect the quality and service life of accessories, but they affect their appearance. In this case, the replacement rhandles are an optional process. But if we are talking about a business center, cultural institution, cafe or restaurant, then it is better to put new, more aesthetic handles here.

Experts do not advise buying such door fittings from domestic or Chinese manufacturers. Their products are rarely of good quality and maintainability. It is better to refer to European-made products. Of course, they will cost much more, but they will last longer and will not cause serious problems during use.

https://windowricesbysize.blogspot.com/
basementegresswindowcost.blogspot.com
egresswindowcost.blogspot.com
costtoinstallwindows.blogspot.com
bestwindowcompanies.blogspot.com
windowcompaninearme.blogspot.com
doorcompaniesnearme.blogspot.com

https://nofaxnoteletrackpaydayloans.us/

https://www.emoneyspace.com/aspectmontage
https://www.bloggportalen.se/BlogPortal/view/BlogDetails?id=203405
https://www.trustami.com/review/626a8ccccc96c58c648b4568-rating
http://educacao.cardiol.br/2014/ecg/pergunta.asp?IdPerg=362288&OP=1
https://www.giveawayoftheday.com/forums/profile/116235
https://fengoffice.com/forum/index.php?topic=48008.0
http://www.rohitab.com/discuss/user/294239-aspectmontage/
http://ttlink.com/aspectmontagema
https://www.bibrave.com/users/164047
https://3dprintboard.com/member.php?86762-Aspectmontage&tab=activitystream&type=user
https://www.igotbiz.com/directory/aspect-montage-inc-listing-110743.aspx
https://www.roleplaygateway.com/member/Aspectmontage/
https://www.gametabs.net/user/420381
https://www.cgmimm.com/newton/general-contractor/aspect-montage-inc
https://www.funadvice.com/aspectmontagema
https://myopportunity.com/profile/alex-zelenenko/sl
http://ochroniarzear.phorum.pl/viewtopic.php?p=12922
https://forums.untangle.com/members/russelljef.html
https://m.localtunity.com/usa/ma/newton/aspect-montage-inc?lat=0&lng=0
https://kenezia.ezcraft.fr/topic/168852-cookhouse-cabinets-demand-of-departure
https://www.courthousesquare.com/aspect-montage-inc.html?action=recommend
http://www.ringmybiz.com/profile/Aspect-Montage-Inc
https://forum.ro-en.ro/index.php/topic,400130.0.html?PHPSESSID=26c6229a22c170f51526289154a3a69e
http://src-minor.netgamers.jp/databbs/databbs.cgi?mode=allread&pastlog=0360&no=6376&page=310&act=past
https://www.vidlii.com/user/Aspectmontage
https://www.dingwallguitars.com/dingwall-media/forum/profile/8783-wellwindowsnaph
https://m.merchantsnearby.com/usa/ma/newton/aspect-montage-inc
globalvision2000.com/forum/member.php?action=profile&uid=591593
https://acedirectory.org/listing/aspect-montage-inc-448733
http://forum.fcmn.co.il/member.php?action=profile&uid=214316
https://www.bizofit.com/business-directory/aspect-montage-inc/
http://kahn.listbb.ru/viewtopic.php?t=4409
https://www.roadtechs.com/nuke/wwwboard/getpost.php?rec_nbr=797579
https://patinajeartistico.es/oldforum/index.php?topic=349584.30
https://patinajeartistico.es/oldforum/index.php?PHPSESSID=dvuk4rr12iob2u6sds3ssv0cb2&action=profile;u=1377080
http://auto-file.org/member.php?action=profile&uid=482413
http://forum.caraudiovideo.autodeclics.com/viewtopic.php?p=668890
https://yaadlinks.com/listing/aspect-montage-inc/
https://ph.sellbuystuffs.com/business-in-manila/details/37295/manufacturing-business
https://www.industryhuddle.com/profile?id=109501
http://forum.francofans.fr/index.php?action=profile;u=898198
https://www.golocalezservices.com/united-states/newton/contractors-1/aspect-montage-inc
http://fcuif.com/redirect.php?tid=1741&goto=lastpost
https://addyp.com/listings/massachusetts/newton-center-121/Carpentry-Contractors
http://www.166552.com/viewthread.php?tid=587721&extra=page=723
https://scitechfitness.com/index.php?mode=thread&id=24127
https://iw.realtyww.info/home-improvement-contractors_newton-c434659/listing_i28016484
https://www.sims-3.net/forum/user-115829.html
http://www.yszq.net/home.php?mod=space&uid=449040
http://forum.schoenheider-woelfe.de/profile.php?mode=viewprofile&u=298502
http://zhouyi68.com/home.php?mod=space&uid=677439&do=index
http://forums.scrapfest.ca/profile.php?mode=viewprofile&u=1954
https://youtubediscussion.com/index.php?action=profile;area=showposts;sa=messages;u=747
http://prachuap.go.th/forum/index.php?topic=364260.0
http://www.diskusikripto.com/member.php?u=65005
https://forum.marketingsparkle.com/index.php?action=profile;area=showposts;sa=messages;u=87113
https://bengalinewspaper.info/member.php?action=profile&uid=7518
https://3lmasar.com/vb/showthread.php?p=10975&mode=linear
http://hailingfrequency.com/boards/index.php?topic=9201.10
https://team.thercproshop.com/member.php?action=profile&uid=6782
http://www.forum.dynamics.com.ru/memberlist.php?mode=viewprofile&u=83062
https://muvzu.com/home-pros/aspect-montage-inc
http://web.symbol.rs/forum/member.php?action=profile&uid=106255
http://www.parandijital.com/forum/member.php?u=62313
https://nayang.go.th/webboard/index.php?action=profile;u=5385;area=showposts;sa=messages
https://masstr.net/member.php?action=profile&uid=15026
https://scriptural-resonance.com/forum/member.php?action=profile&uid=14338
http://tw.gayhk.com/phpBB3/viewtopic.php?t=21409
http://kuko-forum.name/user-7612.html
http://www.changingtheconversation.ca/eDialogues/memberlist.php?mode=viewprofile&u=35499
https://fll.presidentbeef.com/lang/basementslole
https://trust2play.com/forum/egress-window-installation
https://www.kpfinder.com/products/contractors-doors-installation-kitchen-remodeling-bathroom-rem
https://forumreklamowe.net/uzytkownik-windows-in-brick-nat
https://wangrp.net/index.php?topic=135949.0
https://atoms.rocks/showthread.php?mode=linear&tid=67747&pid=175662
https://atoms.rocks/user-26021.html
https://slotfactory.com.au/mybb/showthread.php?tid=1957&pid=3981
https://slotfactory.com.au/mybb/member.php?action=profile&uid=3211
http://www.zibenquan.org/thread-86-1-1.html
http://forum.poiskdnepr.com/viewtopic.php?f=10&t=33975&start=10
http://foroimpagados.com/199726-cookhouse-cabinets-introduction.html
https://www.littleredhomeschool.net/user-13648.html
https://forums.megalith-games.com/member.php?action=profile&uid=212128
http://forum.canecorso.ru/profile.php?mode=viewprofile&u=102727
http://i0110.com/home.php?mod=space&uid=4914511
http://www.ethiocist.org/Areopagus/viewtopic.php?t=4472
http://bbs.xyuemoli.com/home.php?mod=space&uid=13135&do=profile&from=space
http://letpost.net/memberlist.php?mode=viewprofile&u=18457
http://hydratrash.party/sinbin/index.php?action=profile;u=23070;area=showposts;sa=messages
http://forum.rlmines.fr/viewtopic.php?f=23&t=33997
https://algenstadt.de/forum/user-18518.html
http://tutteplo.ru/forum/profile.php?mode=viewprofile&u=24788
https://www.avanti-osaka.com/bbs/honey.cgi?read=17468&bbs=1
https://wap-club.ru/viewtopic.php?p=10104
https://costalero.com/foro/viewtopic.php?t=335
http://www.huathalae.go.th/webboard/index.php?mod=home&do=detail&id=13192&captcha_id=tyzq23l7l15ghcqse972bngsospy99l63a0qb29aodhlg3fdve
http://foro.gamemuseum.es/index.php?topic=45496.0
https://toursinelsalvador.com/forums/member.php?action=profile&uid=7109
http://www.saturday-cl.jp/bbs/all/joyful/joyful.cgi?read=374469
https://propertyhub.us/home-improvement-contractors_newton-c434659/listing_i28016484
http://forum.roboitalia.com/member.php?u=58437
https://jifunzekiswahili.co.tz/member.php?action=profile&uid=10184
http://www.forum.jobland.pl/profile.php?mode=viewprofile&u=171308
http://radioteos.net/forum/index.php?topic=3362.0
http://radioteos.net/forum/index.php?PHPSESSID=76c7246c146bc66e85e4d7fea3d89c62&action=profile;u=31366
http://neverwinter.bplaced.net/forum/viewtopic.php?t=37921